How does the copper nose work

Copper nose is also known as the line nose, copper wiring nose, copper tube nose, terminal and so on. It is used for connecting the wires and cables to the electrical equipment. The top end is fixed to the edge of the screw, and the end is the copper core of wire and cable after peeling. Use copper nose for more than 10 square meters, less than 10 square wires do not use copper nose, switch to cold pressed line nose. Copper nose has a surface plate tin and non-tin, tube pressure and oil - type.

Main application range

Household appliances, electrical industry, mechanical equipment factory, shipyard, distribution cabinet, etc. Good appearance, good conduction and safety.

Type 1: DT, is made of T2 copper bar, product appearance for the spatula round head, can be used to seal oil, for fixed screw on the top side, and in into after peeling at the end of the cable with terminal clamp pressure can.

Model 2: DTG, which is made of a tube of T2 copper tube, is slightly lighter than DT and can be replaced by DT when you do not need to seal the oil. The work is simpler and faster than DT, and the price is relatively cheap.

There are two common types of surface treatment:

1. Acid wash, the color of pickling and red copper are basically the same, which can be beautiful and anti-oxidative and conductive.

2. Tin plating, the surface of copper nose after tin plating is silver and white, which can better prevent oxidation and conduction, and prevent the spread of harmful gas produced by copper in conducting.

Installation notes:

Screw the screw tightly.

2. The cable and copper nose must be inserted in place and pressed tightly with pliers.